6 Pack of 1 Quart Pails of Slip Plate

Product Features & Benefits

• Heavy-duty formula with a high concentration of graphite
• Forms a slick, non-stick coating ideal for areas prone to material buildup
• Ultra-fine dry-film particles create a smooth, uniform surface
• Helps reduce mechanical wear and extend equipment service life
• Maintains lubricity across extreme temperature conditions
• Dry coating will not attract or retain dirt, grit, or debris that cause premature wear
• Hydrophobic graphite repels moisture, rain, and snow
• Made from natural graphite, an environmentally safe lubricant

Application & Surface Preparation

• Prepare surfaces as you would for paint application unless otherwise specified
• Surface must be clean, dry, and free of oil or debris
• Can be applied over select primers to enhance corrosion resistance; verify compatibility with the primer manufacturer
• Bonds to clean metal, wood, and most plastics including acrylics and polyethylene/polypropylene
• Testing on plastics is recommended before full application

Cleanup Instructions

• Clean brushes or spray equipment with paint thinner, VM&P naphtha, or similar solvents while coating is still wet
• Once cured, the coating becomes extremely difficult to remove

General Information

• Dry-film lubricants are applied wet and cure into a durable solid lubricant coating
• Typically applied by brush, spray gun, or aerosol
• Graphite’s natural hydrophobic properties allow water to shed easily from coated surfaces

Why Choose Graphite-Based Dry Film Lubricants

• Dry coating prevents buildup of dust, sand, grit, and debris that increase friction and wear
• Provides reliable friction reduction across temperatures ranging from 75°F to 400°F
• Performs consistently in wet, snowy, and outdoor environments
• Environmentally responsible alternative to petroleum-based wet lubricants

Wet Film Thickness

• Aerosol: less than 1 mil
• Bulk (No. 1): approximately 5–7 mils

Also sold in individual 1qt and 1 gallon quantities!